Author Archives: Jane Font

Spring is Sprung!

I must admit, I’m no fan of summer. I hate farmer tans, and I almost always get one, and mostly on my left arm from driving! I don’t do well in the heat, and it’s so dry in Utah. Since I’m a cloudy day, rain and thunder kinda gal, this doesn’t work out too well for me. I’m kind of like Eeyore. If I could walk around with a dark rain cloud over my head, I would! However, unlike Eeyore, this would make me happy 🙂

Spring, on the other hand, is a-ok. It rains, grass grows, trees burst into life, it’s not too hot (usually), and flowers pop up everywhere!  I’m on a flower kick, lately, so I thought I’d share some of my flowers with you.

Forgotten Flowers Stacking Rings. Like little wild flowers growing between the cement cracks in an abandoned industrial yard.

Copper Lily with Green Amethyst. Like a flower on the prairie, growing around a rusty piece of farm equipment.

Copper Bell Flower Bangles. Like the tiny flowers from a vine growing on a chain link fence.

Grow. The mantra of spring.

Happy spring, everyone! Let’s hope that summer takes its time getting here.


These are my Tiny Treasures Stacking Rings. There are three sterling silver bands, and two slim copper bands. The treasures are a copper dot, a fine silver domed disk, and a 6mm aventurine. Yummy! This set normally sells in my shop for $90. Want to enter to win this set of stacking rings in your size? Check out my Facebook page here. I’ll have details up later on today. Make sure to tell your friends too. The more people participate, the more likely I am to giveaway two sets!

Faux Shibuichi Tutorial Update

I haven’t gotten sick of this technique yet! That’s quite the record, for me. I knew the next step was to figure out how to use this technique in a ring, so that’s exactly what I did. Four, to be exact. Well, ok, five. But one of them is crunched in half because I got mad and ruined it. My husband and I celebrated our 10th anniversary last month. For the last two years, I’ve been thinking I wanted to make us new rings for this milestone, but I couldn’t figure out what to make, so it passed me by. After messing with the faux shibuichi finish, I knew exactly what I wanted to make. The set of rings above are our new wedding bands (we’re a little non-traditional, hehe). This post is not so much a tutorial on how to make a ring, but to tell you what else I learned about this technique. If you haven’t read the tutorial yet, check it out here.

I love copper: the color, the patina possibilities, the workability, the strength. The only thing I don’t like is that it turns your skin green! I know some people don’t mind that, and wear copper rings all the time. Not me! I like the color green and all, but I don’t like my finger to look moldy. I decided to see if the faux shibuichi finish would prevent this ickieness, or at least delay it. To do this, I did the fine silver fusing on one side, quenched in water, scrubbed the back of the band, and fused the fine silver there too. Doing this on both sides did not seem to have any kind of an impact on the other side!

Now, here’s where I got angry: soldering. First, I kicked myself because I grabbed the hard solder right off the bat. What did I tell you in the tutorial? No hard solder! Medium or easy only. So that turned into anti-solderable oxidation city. Then I broke another cardinal rule. Yeah, I pickled it. Then I had to scrub it to death with steel wool, then polish the tar out of it with the flex shaft. I tired it again, this time with easy. Same thing. Part of it would adhere, part of it wouldn’t. I must have tried soldering it in various ways four or five times. That’s when I crushed that ugly in my hands (told you I was mad), and tossed it in the ‘whatever pile.’ I started over. This time I had a really good idea, that turned out to be a junk idea. Instead of using solder, I smeared a little more metal clay paste over the seam and heated it until it flowed. Nope. You’ll never guess what I did then…

Wanna try to guess?

I freakin’ pickled it again! This time it stayed in overnight. I figured, what the heck? It’s probably going to end up with its brother in the ‘whatever pile.’ And then, it happened…

While I was sleeping, I thought about how frustrated I was. Why wouldn’t those rings solder together!? I scrubbed them, I cleaned them, I used easy solder, I had no problem soldering the coils on the charms. Why now? Ah HA! The coils were sterling silver. Maybe the shibuichi finish doesn’t like to be soldered to itself! So first thing this morning, I pulled the blue/green crusted ring band out of the pickle pot, gave it a quick polish with the bristle disk, and cut a little strip of 18 gauge sterling sheet. I can’t remember if I used medium or easy solder, but it doesn’t matter. It soldered beautifully! I like the contrast too. Now, I’m no metallurgist, so I’m not sure why the silver solders so easily to the finish. I wonder if there’s just so much oxidation going on that two pieces of the finish can’t adhere to each other. That’s funny though, because I don’t pay much attention to getting the metal very clean when I solder the sterling on (I like to live life on the edge), and I have zero problems. It’s a perplexing quandary served with a side of whatever.

Now that I (finally) got the rings soldered, I gave each one a quick, asymmetrical flare, a slight cleanup with the bristle disk, and threw them in the tumbler. Notice the difference in color in the photo below? The larger one on the left is the one that got pickled… several times. The smaller one on the right was never so unfortunate. I’m not a huge fan of the pinkishness of it, and while I could polish that out, I think I’ll leave it for awhile and see how it wears. It might get more pink, it might turn brown or grey. Who knows? I’ll let you know when I do.

Now the real test: Does it turn my finger green? It looks like it might be trying to, but I’ve only been wearing it for a couple of hours. **Update: Yep, it’s turning my finger green. However, I choose to see it as still wearing my ring, even when it’s off 🙂

I know the above photo is a little blurry on the face of the rings, but the inside is clear. You can see that they look the same on the inside as on the outside. I like that.

One final note. I didn’t think that the rough finish would be very conducive to stamping. I like to stamp the inside of all my rings, and I was worried that wouldn’t be possible. I used 2mm letters (that’s pretty small!) on the inside, and they’re just as legible as they are on a flat surface! You can just barely make it out in the pinkish ring in the first picture.

Has anyone tried the technique yet? I’d love to see if you do!!

Happy No Pickling!


How to Make a Faux Shibuichi Finish on Copper: A Jewelry Making Tutorial


Sometimes I find that a lack of inspiration while making jewelry can lead to really interesting innovations. In this tutorial, I’m going to show you a technique I came up with during one of these times. I call it “faux shibuichi.” Shibuichi is an ancient Japanese alloy of silver and copper which creates really interesting oxidation possibilities. I particularly like the look of shibuichi when it has been reticulated. You can read a little about this alloy here.

This tutorial assumes that you already know the basics and have the basic tools. If I breeze over something and you have a question about it, please let me know. I’ll be happy to clarify anything for you (can you tell I worked in call centers for many years? “I’ll be happy to help you with that today!”).

Here’s what you’ll need:
– 20 gauge copper sheet cut into about 1×1 inch squares.
– Fine silver metal clay paste.
– Medium or easy paste solder.
– 16 gauge silver wire to solder on.

The first thing you need to do is prepare your fine silver metal clay slip. It really doesn’t matter how thick or thin it is. Experiment with it and see what you prefer. My slip was pretty thick, about the consistency of thick yogurt. The important thing is to make sure it’s very smooth! You don’t want any chunks in the slip because they won’t adhere to the copper and will flake off when you’re done.


I didn’t prepare the copper in any way, except to round off the sharp corners with a file. Yeah, I know. I need a new soldering board. This one is about at the end of its useful life.


Spread a layer of metal clay paste over the surface of the copper with a pallet knife. Some spots I left pretty thick, and others I left thin enough that some of the copper showed through.


Next, break out the torch! I fired these pieces while the silver paste was still wet. If you heat it slowly, the paste will have the opportunity to dry and you’ll experience very little cracking. Like this:


If you heat it faster, the paste will crack and peel up onto itself, like this:


Either way is fine! Try out different methods to see which you like best. If the paste peels up, you’ll have more of the copper exposed. If it doesn’t, you’ll have more silver on the surface. It just depends on the look you’re going for. I prefer a little to a lot of cracking, so I heated them pretty fast.

Continue heating until the paste is dry and the binder has burned off. Once the copper is glowing, get aggressive with the heat! Heat it until the silver melts and flows. As you drag the flame over the surface, the melted silver will follow and you’ll get some really awesome reticulation. You want to make sure that everything has had the chance to flow. See where it’s still white? If you leave it like that, the silver will flake off because the layer of oxidation between the silver and copper prevents fusing.


Here are both pieces, all fused up! Aren’t they pretty? Well, maybe not just yet.


Now here’s where things start to get a little weird. Under normal circumstances, you would want to pickle your pieces to remove oxidation and prepare the surface for soldering. While you can certainly do this, let me caution you against it. DON’T DO IT! That was probably closer to bullying than cautioning, but you get where I’m coming from. Here’s why I’m so against it:

First, by pickling you’re basically depletion gilding the silver and leaving a layer of fine silver on top. That means you’re removing the copper oxides (well duh! That’s what pickling is for, right?). But we want the oxides because that’s what shibuichi is all about!

Second — and I don’t know if it’s just the pickle I’m using or if this would happen with any kind of pickle — the pickle turns blue almost immediately. Also, a crusty, green/blue layer is added to the surface of the silver. If you’re interested, I’m using PickleIt, which you can get at It’s supposed to be “a safe alternative” to regular pickle. Normally, it works just fine on copper and silver, and I really like it. I only have to change it every couple of weeks, but while I was working on these charms, I had to change it twice — and that was after only 10 charms!

Third, it’s just way too much work. The green/blue scum does come off with some polishing and a little elbow grease, but then the silver is exposed and the oxides are gone. Now you have to flow the silver again just to get those back. You might as well just save yourself the hassle and not pickle.

Here’s a photo of the first piece after fusing. All I did was polish it with a bristle disk on my flex shaft.


Here’s a photo of the second piece after pickling. This must have been right after I changed the pickle, because the green/blue scum isn’t too bad. Some of my first pieces were completely covered! Also notice that you can’t see any silver. What’s not covered by scum is copper colored. I’m not sure why it didn’t remove the copper from the silver. If you know why this is, I’d love to hear!


And here’s what it looked like after polishing. Big difference when compared to the one that wasn’t pickled, right? It’s very silvery, whereas the other one was almost a gunmetal color.


Next, I’m going to solder on the silver coils. Even though the first piece was slightly grey (which is a characteristic of shibuichi), I had no problems soldering, except when I tried to use hard solder. Because hard solder has a higher melting point, the surface flowed on the first few pieces I made. This creates more oxides and I found myself having to re-solder. What a pain! Once I moved down to medium solder, I had no problems.

Before you jump into soldering, let me tell you about a couple of other things you need to know. Sometimes, there are pockets of air (or pickle, if you threw caution to the wind) between the silver and copper. If you heat the piece without eliminating all of the tiny air pockets, the pockets can explode. Literally. This happened to me once when I was working on a piece and missed an air pocket. It snapped, and a tiny piece shot across the room. I was terrified I was going to take one in the eye! Fortunately, these pockets are pretty easy to detect. Just inspect the surface for anything that looks like a blister. If you find one, poke it with the tip of your fingernail (or, if you’re a nail-biter like me, use the tip of a needle tool). If it leaves a dent, you found one. If it doesn’t, you’re probably good. If you DO find one, heat the piece slowly until it flows again. Make sure to melt that spot down all the way.

Next, if you see any spots that are still very silvery before you polish, they’re probably going to flake off. If that’s the case, re-melt it! Once you’ve taken care of these things, you can polish and solder.

Here’s the first piece immediately after soldering.


On the second piece (the one that was unfortunate enough to be pickled), I allowed the surface to flow a bit while soldering to regain the oxidized surface. However, I still had to take care not to polish it too much. Even though it flowed again, the oxides on the surface were not quite as strong. Here are both pieces all polished up!

Here’s what I was telling you about. I should have flowed all of those bright silver spots out, but I didn’t because I wanted to show you what to look for. See that spot in the red circle?

Just a quick scrape with my fingernail, and this is what happened.

Other than that, I’m pretty happy with them! What do you think? If you try out this technique, I would love to see photos of what you came up with. You can post them to my Facebook fan page here. If you have any questions about this technique, feel free to post your questions below, or on my Facebook page.

Happy faux shibuichi-ing!


Four a Month 1 – Elizabethan/Renaissance

Over the last couple of days, I’ve been trying to decide what my theme will be for the first month of the Flickr Four a Month challenge. My birthday is in January, so being the narcissist that I am, I knew whatever I made had to have garnets. I was going to continue on my art nouveau kick, but you can’t wear the same prom dress two proms in a row (I wouldn’t really know about that, actually. I never went to prom. Not for me.). So I searched ‘January’ online to get some ideas. I found out that January is National Soup Month in the U.S., but I’m not all that interested in soup. However, several interesting things have happened in January. Dr. Martin Luther King Jr.’s birthday is in January. In fact, it’s the 15th, same as mine! Ellis Island was opened in 1892, and President Lincoln issued the Emancipation Proclamation in 1863. All very inspiring events, but nothing was grabbing me. And then, I found it. In January 1559, Elizabeth Tudor was crowned Queen of England.

I have a fascination with British royalty from the days of old, and Elizabeth Tudor in particular. So I’ve decided this is the direction I’m going to take for the month. I have several ideas that should last me for four pieces. Because my predilection is toward industrial themes, I’ll throw a little bit of that in there too, so don’t expect anything too historically accurate. I’m going to try and blog a bit more this year, because I flat out sucked at it last year.

Here’s what I’m starting with.

One partially used sheet of sterling silver. Original dimensions, 2×6 inches. There should be enough here to last most of the month… I hope.


And on to the Next Thing

Well, I did it! I finished RAW! Here’s number 52/52.










I call this one “Evolve” for a couple of reasons. First, it really took on a life of its own. In fact, the band and the top were supposed to be two different rings. Second, because it represents all of the personal evolution I’ve gone through this year. I started out as a hobbyist working in metal clay, and I ended as a self-employed artist working in traditional metalsmithing techniques (and a little metal clay too).

2012 is bringing a new challenge: The Four a Month challenge. I’m really excited about this one! It will be nice to experiment with techniques, materials, themes, and to make something other than rings (although I’ll admit they are my favorite things to make). Check out the Flickr page for this new challenge daily. Some amazing artists have joined up, and I’m sure there will be fabulous pieces! If you would like to join the challenge, feel free! The more the merrier 🙂

Happy New Year! Here’s to our continued evolution.


I Never Finish Anythi

It’s so true! Nearly every corner of my house holds the remnant of some long abandoned project. One of the saddest examples are the two little wooden shelves I bought with the intention of painting them and hanging them. Nope, I took them out of my car after I bought them, set them down in the garage, and walked away. That must have been about 9 years ago. They’re still there.

Earlier this year, I started the RAW challenge on Flickr. The challenge is to make a ring, take pictures of it, and then post it to the group. One ring every week for the entire year. That’s 52 rings. A couple of weeks ago, I posted number 38. Eeesh… Is this just going to be another one of those things that I never finish?! For some reason, the thought of not finishing this challenge makes me feel really bad. I think that’s because I started this challenge at the same time that I was starting to get into metalworking. Up until the first of this year, I really only ever worked with metal clay. The thought of soldering made me cringe! I used this challenge as a way to push myself to expand my skill set, and you know what? It worked!

Now, the real challenge: to finish RAW! I have 14 rings left to go, and I’m going to do it in the next 2 weeks! AND I’m going to do it without cheating (i.e. I will not post a recreation of a ring I’ve already posted to RAW, and I will not post the same ring with different colored stones). These will be all new creations. Three such rings have already been posted.

Number 39

Puddle Water










Number 40

Ornate Relic Shield











and Number 41

Ornate Relic Band










Number 42 will go up tomorrow. I took pictures of it today, but they look awful, so I’ll have to retake them.

If you’re like me (poor thing) and you don’t finish things, make a goal for yourself to do so. It’s amazingly fulfilling to finish something you’ve started… I should probably post that up all over my house, over every pile of unfinished projects. Wish me luck.

Happy Holidays!